Summaries of Training & Services

OSHA 10 & 30 Hour Course-Construction and General Industry

The OSHA Outreach Training Program for the Construction Industry provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces in the construction industry. The program also provides information regarding workers’ rights, employer responsibilities, and how to file a complaint. This is a voluntary program and does not meet training requirements for any OSHA standards.

Through this program, workers can attend 10-hour or 30-hour classes delivered by OSHA-authorized trainers. The 10- hour class is intended for entry level workers, while the 30-hour class is more appropriate for supervisors or workers with some safety responsibility. Through this training, OSHA helps to ensure that workers are more knowledgeable about workplace hazards and their rights, and contribute to our nation’s productivity.

OSHA 30 Hour Course-Minimum of 4-7.5 Hour Days
OSHA 10 Hour Course-Minimum of 2-5 Hour Days

CPR/First Aid/AED-EMS or American Heart Association Certification Available

CPR/First Aid/AED is a classroom, video-based, instructor-led course that teaches students critical skills needed to respond to and manage a first aid, choking or sudden cardiac arrest emergency in the first few minutes until emergency medical services (EMS) arrives.

Students learn skills such as how to treat bleeding, sprains, broken bones, shock and other first aid emergencies. This course also teaches adult CPR and AED use.

This course is for anyone with limited or no medical training who needs a course completion card in CPR/First Aid/AED used to meet job, regulatory or other requirements.

  • First aid basics
  • Medical emergencies
  • Injury emergencies
  • Environmental emergencies
  • Adult CPR and AED use
  • Optional modules in child CPR and AED use and infant CPR
  • Optional written test

The CPR and AED Certification course offered by EMS Safety Services, Inc. is OSHA compliant and is approved by federal, state, municipal and private/nonprofit organizations. This training program may be taught separately or as part of a comprehensive safety course.

Hazwoper Training- 8 hour, 24 hour, 40 hour

8 Hour

This course meets the requirements outlined in OSHA 29 CFR 1910.120 for 8 (eight) hours of annual refresher training for workers at hazardous waste sites. This course is designed for general site workers who remove hazardous waste or who are exposed or potentially exposed to hazardous substances or health hazards. The course is comprised of nine sections covering topics pertaining to workplace hazards associated with Hazardous Waste Operations and Emergency Response (HAZWOPER). Topics include HAZWOPER regulations, site characterization, toxicology, hazard recognition, personal protective equipment, decontamination, medical surveillance, confined space entry and emergency procedures. Upon successful completion of the course you will receive a certificate of completion.

Course pre-requisite
Enrollment is open to those who have already completed the 40-hour or 24-hour HAZWOPER training.

Learning Outcomes

  • Read and understand OSHA regulations and requirements
  • Summarize Site Characterization
  • Understand the principles of toxicology and how they relate to various types of chemical exposures
  • Describe potentially hazardous situations involving corrosives, solvents, oxidizers and reactive chemicals
  • Identify the uses for Personal Protective Equipment (PPE) and how to choose the correct PPE
  • Understand the principles of decontamination as well as levels of decontamination and methods
  • Understand the confined space permit system; be able to identify the main confined space atmospheric hazards, types of ventilation and gain an overall understanding of medical concerns associated with confined spaces
  • Understand the various considerations in an emergency situation and the importance of training and actions to personal safety and the safety of others
  • OSHA 29 CFR 1910.120 compliant
  • 8 hours annual refresher training written by industry expert trainers!
  • 15 customized activities; 4 types: True/False, Multiple Choice, Drop Down, Drag & Drop
  • 11 Knowledge Checks, 5 questions each; un-graded, self paced
  • 7 videos
  • 9 Lesson Quizzes, 10 questions each; 70% pass rate
  • 1 Final Exam, 50 questions; 70% pass rate
  • Be compliant fast – receive your Certificate of Completion immediately after successful course completion.

24 Hour
HAZWOPER 24-hour is required for employees visiting an Uncontrolled Hazardous Waste Operation mandated by the Government. This course covers broad issues pertaining to the hazard recognition at work sites. OSHA has developed the HAZWOPER program to protect the workers working at hazardous sites and devised extensive regulations to ensure their safety and health. This course, while identifying different types of hazards, also suggests possible precautions and protective measures to reduce or eliminate hazards at the work place.

Regulatory
Workers must have 24 hours of initial training and one day of supervised field experience before they are allowed to enter the site.

The online course meets the standard requirement of 24 hours of initial training. The one day field experience under a trained, experienced supervisor is the responsibility of the student’s employer or potential employer.

Course pre-requisite
There are no pre-requisite requirements for this course.

Learning Outcomes
At the conclusion of this course, the student will be able to:

  • Understand the purpose of OSHA and its role in regulating occupational safety
  • Use Site Characterization to establish problems that may exist in your workplace and measures that can be implemented to eliminate hazards
  • Identify hazardous materials existent in the workplace and the possible methods, symptoms and preventative measures of exposure
  • Encourage the use of Material Safety Data sheets (MSDS) to identify and properly handle hazardous materials
  • Familiarize yourself with materials, compounds and mixtures that may present flammable, explosive, chemical or radiological hazards
  • Emphasize the importance of personal protective equipment in limiting hazardous exposure
  • Establish an effective Site Control Program to limit the risk of exposure to only those working in the hazardous work zone
  • Implement procedures for treating workers in the event of hazardous exposure

Testing
All module quizzes require a score of 70 to proceed forward in the course. The final exam also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken three times if necessary.

40 hour
HAZWOPER 40-hour is required for workers that perform activities that expose or potentially expose them to hazardous substances.

This course is specifically designed for workers who are involved in clean-up operations, voluntary clean-up operations, emergency response operations, and storage, disposal, or treatment of hazardous substances or uncontrolled hazardous waste sites. Topics include protection against hazardous chemicals, elimination of hazardous chemicals, safety of workers and the environment and OSHA regulations. This course covers topics included in 29 CFR 1910.120.

Regulatory
Trainees must have additional hands-on training in the donning, doffing, and use of the Personal Protective Equipment required for their jobsite(s) in accordance with 29 CFR 1910.120.
Workers must have 40 hours of initial training and at least three days of supervised field experience before they are allowed to enter the site.

The online course meets the standard requirement of 40 hours of initial training. The required 8 hours of hands-on training can be completed by a qualified instructor. The three days field experience under a trained, experienced supervisor is the responsibility of the student’s employer or potential employer.

Course pre-requisite
There are no pre-requisite requirements for this course.

Learning Outcomes
At the conclusion of this course, the student will be able to:

  • Understand the purpose of OSHA and its role in regulating occupational safety
  • Use Site Characterization to establish problems that may exist in your workplace and measures that can be implemented to eliminate hazards
  • Identify hazardous materials existent in the workplace and the possible methods, symptoms and preventative measures of exposure
  • Encourage the use of Material Safety Data sheets (MSDS) to identify and properly handle hazardous materials
  • Familiarize yourself with materials, compounds and mixtures that may present flammable, explosive, chemical or radiological hazards
  • Emphasize the importance of personal protective equipment in limiting hazardous exposure
  • Establish an effective Site Control Program to limit the risk of exposure to only those working in the hazardous work zone
  • Implement procedures for treating workers in the event of hazardous exposure

Testing
All module quizzes require a score of 70 to proceed forward in the course. The final exam also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken three times if necessary.

NCCER CSST Training-Available December 2015

Construction Site Safety Technician (CSST) Training
Construction Site Safety Supervisor
Field Safety
Safety Technology

The CSST Training is a training program that thoroughly examines over 50 safety-related topics. Participants receive training that allows them to return to their companies with applicable new skills and a proactive approach to safety.

The CSST Training is designed to prepare an individual or a team of professionals in your company for assuming the responsibility of coordinating a construction site/project safety program. This course introduces the trainee to the required knowledge and activities of a construction site safety technician and is intended for all employees who desire to work in the construction industry as safety personnel.

Upon successful completion of the CSST course, certified construction site safety technicians will receive a certificate of completion and wallet card, and will be entered into the NCCER ANR Registry.
This course will be offered periodically throughout the year. The minimum course enrollment size is 10 participants

Training for the Competent person
Fall Protection Scaffolding Trenching/Excavation
An OSHA “competent person” is defined as “one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them” [29 CFR 1926.32(f)].

COMPANY SAFETY REPRESENTATION Safety Management

  • Bi-Weekly Facility or Job-Site Auditing-Environmental/Safety
  • Keep your company’s safety training current and OSHA compliant.
  • We are available to answer the OSHA/DOT/TCEQ/EPA questions you may have in regards to your day-to-day operations.
  • Accident Investigation
  • VPP Auditing
  • 52 Week Safety Training Program
  • Weekly Safety Meeting Program
  • On-Call 24 Hours
  • Case Management
  • Walk you through your audits: ISNetworld, PICS, OSHA/DOT

Professional Safety/Craft Staffing-Contract/Temp to Hire

Neches Safety & Consulting Group, LLC provides Safety/Craft staffing for any size project.

Safety Staffing

Safety Attendants Safety Technicians Safety Supervisors Safety Coordinators Safety Managers

Craft Staffing Administration

  • Firewatch
  • Laborers
  • Welders
  • Pipefitters
  • Construction Coordinators Supervisors
Neches Safety & Training

Neches Safety & Consulting Group LLC is a reliable, flexible, knowledge, affordable provider of safety consulting services and training for all industries including construction, general industry, food industry, hotels, daycare's and insurance companies throughout the world.

Our Affiliations

Like Us On Facebook